Table of Contents
Advertisement
8. Programmable Features
4. Press {SET}.
5. Press {SET} again.
6. Press {MENU}.
Note:
L The ECM selection (feature #68 on page 71)
will not be reset.
72
8.4 Direct commands for
programming features
You can also select the desired setting by directly
entering the program code (# and a 2-digit
number) and direct command.
For more details on the features, see page 68 to
page 71.
1
Press {MENU}.
2
Press {#} and the 2-digit code number.
3
Press the desired direct command to display
the desired setting.
L This step may be slightly different
depending on the feature.
4
Press {SET}.
5
To exit programming, press {MENU}.
8.4.1 Program code and direct
command button
{#}{0}{1} Date and time
L Enter the date and time using the dial
keypad. See page 26 for details.
{#}{0}{2} Your logo
L Enter your logo using the dial keypad. See
page 26 for details.
{#}{0}{3} Your fax number
L Enter your fax number using the dial keypad.
See page 28 for details.
{#}{0}{4} Sending report
– {1}: "ON"
– {2}: "OFF"
– {3}: "ERROR" (default)
{#}{0}{6} FAX ring count
– {2}: "2" (default)
– {3}: "3"
– {4}: "4"
– {5}: "5"
– {6}: "6"
– {7}: "7"
– {8}: "8"
– {9}: "9"
{#}{0}{6} TAM ring count
– {2}: "2" (default)
– {3}: "3"
– {4}: "4"
– {5}: "TOLL SAVER"
Advertisement
Table of Contents
