Direct Commands For Programming Features - Panasonic KX-FL511E Operating Instructions Manual

6. Programmable Features
6.4 Direct commands for
programming features
You can also select the desired setting by directly
entering the program code (# and a 2-digit
number) and direct command.
1
Press {MENU}.
2
Press {#} and the 2-digit code number.
3
Press the desired direct command, using the
dial keypad, to display the desired setting.
L This step may be slightly different
depending on the feature.
4
Press {SET}.
5
To exit programming, press {MENU}.
Program code and direct command key
{#}{0}{1} Date and time
L Enter the date and time using the dial keypad
(see page 19 for details).
{#}{0}{2} Your logo
L Enter your logo using the dial keypad (see
page 20 for details).
{#}{0}{3} Your fax number
L Enter your fax number using the dial keypad
(see page 21 for details).
{#}{0}{4} Sending report
– {1}:"ON"
– {2}:"OFF"
– {3}:"ERROR" (default)
{#}{0}{6} Fax ring count
– {1}:"1"
– {2}:"2" (default)
– {3}:"3"
– {4}:"4"
– {5}:"5"
– {6}:"6"
– {7}:"7"
– {8}:"8"
– {9}:"9"
{#}{1}{2} Remote activation ID
– {1}:"ON"
– {2}:"OFF" (default)
L If you select "ON", then enter your ID from 1 to
5 digits using 0-9, * and #.
{#}{1}{7} Ringer pattern
– {1}:"A" (default)
– {2}:"B"
– {3}:"C"
40
{#}{2}{2} Journal report
– {1}:"ON" (default)
– {2}:"OFF"
{#}{2}{3} Overseas mode
– {1}:"NEXT FAX"
– {2}:"OFF"
– {3}:"ERROR" (default)
{#}{2}{5} Delayed transmission
– {1}:"ON"
– {2}:"OFF" (default)
L If you select "ON", then enter the fax number
and transmission time using the dial keypad
(see feature #25 on page 38 for details).
{#}{2}{6} Caller ID list
– {1}:"ON" (default)
– {2}:"OFF"
{#}{3}{7} Auto reduction
– {1}:"ON" (default)
– {2}:"OFF"
{#}{3}{9} Display contrast
– {1}:"NORMAL" (default)
– {2}:"DARKER"
{#}{4}{1} Fax activation code
– {1}:"ON" (default)
– {2}:"OFF"
L If you select "ON", then enter your code from 2
to 4 digits using 0-9, * and #.
{#}{4}{4} Memory reception alert
– {1}:"ON" (default)
– {2}:"OFF"
{#}{4}{6} Friendly reception
– {1}:"ON" (default)
– {2}:"OFF"
{#}{6}{8} ECM selection
– {1}:"ON" (default)
– {2}:"OFF"
{#}{7}{6} Connecting tone
– {1}:"ON" (default)
– {2}:"OFF"
{#}{7}{9} Toner save
– {1}:"ON"
– {2}:"OFF" (default)
{#}{8}{0} Reset advanced features
– {1}:"YES"
– {2}:"NO" (default)
L If you select "YES", press {SET} 2 times, then
press {MENU} to exit programming.