Table of Contents
Advertisement
Connections and Setup
3 Preparation
3.1 Connections
Important:
L The unit will not function when there is a
power failure. To make calls in emergency
situations, you should connect a
telephone that can function during a
power failure to the telephone line.
1 Mains lead
L Connect to Household Mains Supply
(220 V – 240 V, 50 Hz).
2 Telephone line cord
L Connect to telephone network.
2
Caution:
L The mains lead must remain connected at
all times.
L After connection, you must charge the
batteries to make or answer calls with the
handset (page 22).
L Never install telephone wiring during a
lightning storm.
L When you operate this product, the power
outlet should be near the product and
easily accessible.
L Be sure to use the telephone line cord
included in this unit.
L Do not extend the telephone line cord.
Note:
L If any other device is connected to the same
telephone line, this unit may disturb the
network condition of the device.
L If you use the unit with a computer and your
internet provider instructs you to install a filter
1
(3), please connect the telephone line cord
as follows.
3
3. Preparation
21
Advertisement
Table of Contents
