Direct Commands For Programming Features - Panasonic KX-FT988FX Operating Instructions Manual

8. Programmable Features
"FAX ONLY": FAX only mode (page 26)
Code #78: Changing the TEL/FAX delayed ring
setting
TEL/FAX RING
RINGS=2 [±]
If you use an extension telephone in TEL/FAX mode,
select the desired number of times the extension
telephone rings before the unit answers the call. You can
select "1", "2" (default), "3", "4", "5", "6", "7", "8" or
"9". See page 25 for details.
Code #80: Resetting advanced features to their
default settings
SET DEFAULT
RESET=NO [±]
To reset the advanced features:
1. Press {MENU}.
2. Press {#}, then {8}{0}.
3. Press {A} or {B} repeatedly to select "YES".
4. Press {SET}.
5. Press {SET} again.
6. Press {MENU}.
L Language selection (feature #48, page 34) and the
location setting (feature #74 on page 35) will not be
reset.
8.4 Direct commands for
programming features
You can also select the desired setting by directly
entering the program code (# and a 2-digit number) and
direct command.
For more details on the features, see page 32 to page
36.
1
Press {MENU}.
2
Press {#} and the 2-digit code number.
3
Press the desired direct command to display the
desired setting.
L This step may be slightly different depending on
the feature.
4
Press {SET}.
5
To exit programming, press {MENU}.
8.4.1 Program code and direct command
button
{#}{0}{1} Date and time
L Enter the date and time using the dial keypad. See
page 11 for details.
{#}{0}{2} Your logo
L Enter your logo using the dial keypad. See page 12
for details.
36
{#}{0}{3} Your fax number
L Enter your fax number using the dial keypad. See
page 13 for details.
{#}{0}{4} Sending report
j {0}: "OFF"
j {1}: "ON"
j {2}: "ERROR" (default)
{#}{0}{6} FAX ring count
j {1}: "1"
j {2}: "2" (default)
j {3}: "3"
j {4}: "4"
j {5}: "5"
j {6}: "6"
j {7}: "7"
j {8}: "8"
j {9}: "9"
{#}{0}{6} TAM ring count (KX-FT988 only)
j {0}: "TOLL SAVER"
j {2}: "2" (default)
j {3}: "3"
j {4}: "4"
j {5}: "5"
j {6}: "6"
j {7}: "7"
{#}{1}{0} Message recording time (KX-FT988 only)
j {0}: "GREETING ONLY"
j {1}: "1 MINUTE"
j {2}: "2 MINUTES"
j {3}: "3 MINUTES" (default)
{#}{1}{1} Remote operation ID (KX-FT988 only)
L Enter a 3-digit number to activate the remote
operation feature. To deactivate the remote operation
feature, press {*}.
{#}{1}{3} Dialling mode
j {1}: "PULSE"
j {2}: "TONE" (default)
{#}{1}{7} Ringer tone
j {1}: "TONE 1" (default)
j {2}: "TONE 2"
j {3}: "TONE 3"
{#}{2}{2} Automatic journal report
j {0}: "OFF"
j {1}: "ON" (default)
{#}{2}{3} Overseas mode
j {0}: "OFF"
j {1}: "NEXT FAX"
j {2}: "ERROR" (default)