Direct Commands For Programming Features - Panasonic KX-FP141G Operating Instructions Manual

7. Programmable Features
Code #72: Turning the AUTO ANSWER mode
on remotely
REMOTE TURN ON
=ON [±]
See page 29 and page 39 for details.
Code #76: Setting the connecting tone
CONNECTING TONE
=ON [±]
If you often have trouble when sending faxes,
this feature allows you to hear connecting tones;
fax tone, ring back tone and busy tone. You can
use these tones to confirm the status of the other
party's machine.
"ON" (default): You will hear connecting tones.
"OFF": Deactivates this feature.
Note:
L If the ring back tone continues, the other
party's machine may not be a facsimile or
may have run out of paper. Check with the
other party.
L The connecting tone volume cannot be
adjusted.
Code #77 (KX-FP145 only): Changing the
receiving mode in the auto answer setting
AUTO ANSWER
=TAD/FAX [±]
"TAD/FAX" (default): Telephone Answering
Device/Facsimile mode (page 30)
"FAX ONLY": Facsimile only mode (page 30)
Code #80: Resetting advanced features to
their default settings
SET DEFAULT
RESET=NO [±]
To reset the advanced features:
1. Press {MENU}.
2. Press {#}, then {8}{0}.
3. Press {A} or {B} repeatedly to select "YES".
4. Press {SET}.
5. Press {SET} again.
6. Press {MENU}.
Note:
L The language setting (feature #48, page 46)
and ECM selection (feature #68, page 47)
will not be reset.
48
7.4 Direct commands for
programming features
You can also select the desired setting by directly
entering the program code (# and a 2-digit
number) and direct command.
For more details on the features, see page 44 to
page 48.
1
Press {MENU}.
2
Press {#} and the 2-digit code number.
3
Press the desired direct command, using the
dial keypad, to display the desired setting.
L This step may be slightly different
depending on the feature.
4
Press {SET}.
5
To exit programming, press {MENU}.
7.4.1 Program code and direct
command button
{#}{0}{1} Date and time
L Enter the date and time using the dial keypad
(see page 16 for details).
{#}{0}{2} Your logo
L Enter your logo using the dial keypad (see
page 17 for details).
{#}{0}{3} Your fax number
L Enter your fax number using the dial keypad
(see page 18 for details).
{#}{0}{4} Sending report
– {1}: "ON"
– {3}: "ERROR" (default)
{#}{0}{6} FAX ring count
– {1}: "1"
– {2}: "2" (default)
– {3}: "3"
– {4}: "4"
– {5}: "5"
– {6}: "6"
– {7}: "7"
– {8}: "8"
– {9}: "9"
{#}{0}{6} TAD ring count (KX-FP145 only)
– {1}: "1"
– {2}: "2" (default)
– {3}: "3"
– {4}: "4"