Table of Contents
Advertisement
Code #77: Changing the receiving mode in
the auto answer setting
AUTO ANSWER
=TAM/FAX
[±]
"TAM/FAX" (default): Telephone Answering
Machine/Fax mode (page 48)
"FAX ONLY": FAX only mode (page 49)
Code #78: Changing the TEL/FAX delayed
ring setting
TEL/FAX RING
RINGS=2
[±]
If you use an extension telephone in TEL/FAX
mode, select the desired number of times the
extension telephone rings before the unit
answers the call. You can select "1", "2"
(default), "3", "4", "5", "6", "7", "8" or "9".
See page 47 for details.
Code #80: Resetting advanced features to
their default settings
SET DEFAULT
RESET=NO
[±]
To reset the advanced features:
1. Press {MENU}.
2. Press {#}, then {8}{0}.
3. Press {A} or {B} repeatedly to select "YES".
4. Press {SET}.
5. Press {SET} again.
9. Programmable Features
9.4 Direct commands for
programming features
You can also select the desired setting by directly
entering the program code (# and a 2-digit
number) and direct command.
For more details on the features, see page 63 to
page 67.
1
Press {MENU}.
2
Press {#} and the 2-digit code number.
3
Press the desired direct command to display
the desired setting.
L This step may be slightly different
depending on the feature.
4
Press {SET}.
5
To exit programming, press {MENU}.
9.4.1 Program code and direct
command button
{#}{0}{1} Date and time
L Enter the date and time using the dial
keypad. See page 20 for details.
{#}{0}{2} Your logo
L Enter your logo using the dial keypad. See
page 21 for details.
{#}{0}{3} Your fax number
L Enter your fax number using the dial keypad.
See page 23 for details.
{#}{0}{4} Sending report
– {1}: "ON"
– {2}: "OFF"
– {3}: "ERROR" (default)
{#}{0}{6} FAX ring count
– {1}: "1"
– {2}: "2" (default)
– {3}: "3"
– {4}: "4"
– {5}: "5"
– {6}: "6"
– {7}: "7"
– {8}: "8"
– {9}: "9"
{#}{0}{6} TAM ring count
– {0}: "AUTO"
– {2}: "2" (default)
– {3}: "3"
67
Advertisement
Table of Contents
