Table of Contents
Advertisement
4. Telephone
L Consult your service provider for more
information.
1
Press {j/OK}.
2
Select "SMS", then press {>}.
3
Select "Public", then press {>}.
4
Select "Settings", then press {>}.
5
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page 80).
6
Select "Message Centre1" or "Message
Centre2", then press {>}.
7
Edit the number as necessary, then press
{j/OK}.
8
Select "Save", then press {>}.
9
Press {ih}.
Note:
L If your phone is connected to a PBX, you
need to add the PBX line access number and
a dialling pause to the beginning of the
Message Centre 1 phone number.
4.14 Registering
mailboxes
Each SMS mailbox you wish to use must be
registered with BT Text. There are two ways you
can register a mailbox:
– Send an SMS message to another person.
– Send the text message 'REGISTER' to
destination number 00000.
4.15 Sending a message
{k}
{>}{e}{v}
4.15.1 Writing and sending a new
message
1
Press {j/OK}.
2
Select "SMS", then press {>}.
42
3
4
5
6
7
{j/OK}
{R}
{ih}
{C/ T }
8
9
10
To access the public mailbox
Select "Public", then press {>}.
To access a private mailbox
Select the desired mailbox, press {>}, then
enter its password.
Select "Create", then press {>}.
L If "^Use Last Text?" is displayed, you
can use the text from the last message
you created by pressing {e}. This
message will be displayed only if the last
message was created using the same
mailbox you selected in step 3.
Enter the message (page 47), then press
{j/OK}.
Enter the destination telephone number.
Manually:
Enter the number, up to 20 digits.
Using the handset phonebook:
1. Press {k}.
2. Press {e} or {v} repeatedly to display
the desired item.
L You can also find an item using one of
the search methods on page 32.
3. Press {j/OK}.
Using the Caller ID list:
1. Press {e} or {v} repeatedly to select
the party.
2. Press {j/OK}.
Using the redial list:
1. Press {R} repeatedly to select the
telephone number.
2. Press {j/OK}.
If you wish to send the message to the other
party's mailbox, enter the other party's
mailbox number after the destination phone
number.
Example: The other party's phone number
is 123456 and their mailbox number is 1.
Enter 1234561.
L To send the message to the public
mailbox, skip to step 8.
Press {j/OK}.
To save the message, select "Yes", then
press {>}.
L To send the message without saving it,
select "No", then press {>}.
To send the message, select "Send", then
press {>}.
Advertisement
Table of Contents
