Table of Contents
Advertisement
Storing/editing the connection settings
(obtainable from your network operator)
Before proceeding and if you have not already done so please enter the
current time and date as described on page 48.
The profile list can contain up to 10 profiles.
To enter and store the profile details,
1
Press
Select Profile list.
2
3
Select an empty profile ([...]) and press New
4
Enter the Proxy name and press OK
5
Select the Gateway settings.
Enter the IP address and press OK
Enter the Home page address and press OK
Select the Activate security settings for the connection (Never,
Automatic or Always) and press Select
Validate the Normal port address and press OK
Validate the Secure port address and press OK
Select the Send characteristics settings (On or Off) and press
Select
Press End
Select the Circuit access settings.
6
Enter the Phone number and press OK
Enter the Login name and press OK
Enter the Login password. Each character will turn into a star (*)
after a short while. Press OK
Select the transmission Speed (9600 or 14400) - if required -
and press Select
Select the transmission Mode (Numeric or Analog) and press Select
Enter the Automatic disconnection time and press OK
Press End
Select the Packets settings *.
7
Choose a GPRS Access point names and press Select
Enter the Automatic disconnection time and press OK
Press End
8
Select the Connection mode (Circuits, Packets * or Circuits +
packets) and press Select
9
Select the Push Parameters settings.
Enter the Push Proxy SMS centre phone number and press OK
Enter the Push Proxy SMS address and Push Proxy IP
address phone numbers and press OK
Press End
10
Press Exit
11
* GPRS availability is operator dependent
. Select Internet.
.
, then select Yes to confirm data storage.
.
, then select Yes to confirm data storage.
, then select Yes to confirm data storage.
, then select Yes to confirm data storage.
or
to return to the standby display.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
55
Advertisement
Chapters
Table of Contents
