Incoming Calls - Mitsubishi TRIUM ECLIPSE User Manual

Press Select
6
The display will confirm your request.
7 Press Exit
4
To turn off or check the status of call divert,
1
Press
Select GSM Services. Select Call diverting
2
3
Select from the divert options and press
Select Cancel or Status.
4
Your selection will be confirmed.
5 Press Exit
To cancel all (multiple) diverts,
1
Press
Select GSM Services. Select Call diverting
2
Select Cancel all. Confirmation will be displayed.
3
4
Press Exit
4
Call waiting
This feature allows to receive new calls, while engaged in a conversation.
To activate call waiting,
1
Press
Select GSM Services. Select Call waiting.
2
Select Activate. The network will return either Activated or
3
Check your request.
4
Caller Line Identity - showing/hiding your mobile number
(network dependent)
Most networks allow the Caller Line Identity feature (CLI) i.e. the feature
which shows the incoming number (ID) while receiving a call. Selecting
Receiving caller ID will allow you to check the availability of such a fea-
ture.
Receiving caller ID
This feature enables you to find out whether a network presents the ID of

incoming calls

1
Press
or
or to return to the standby display.
1. If the 'On no reply' option is selected you will be requested to enter a delay period of 5, 15 or
30 seconds (network dependent).
2. Call diverts for both Line 1 and Line 2 must be set for each line. During call divert program-
ming, only the line currently selected is affected by the call divert selected. To carry out a call
divert on the other line you must select this other line first (menu Calls & Times - Line selection).
. Select Settings.
or to return to the standby display.
. Select Settings.
or to return to the standby display.
This action cancels all voice diverts (for voice, faxes and data calls) for the line currently in use. To
cancel call diverts for the other line you must select this other line first (menu Calls & Times - Line
selection).
. Select Settings.
You can also cancel or check the service status.
.
. Select Settings.
to validate your selection.
.
.
.
31