Voice Memo
The Eclipse mobile lets you to record one or several memos of up to 120 seconds
total. Each memo is a part of this stock of time, and may be of any duration, pro-
vided the global limit cannot exceed this limit of 120 seconds.
To record a voice memo or a phone conversation,
To listen to the voice memo,
To erase a memo,
WAP™
Either your phone is pre-programmed with the settings or you must enter them.
See below to enter the settings. If you cannot access the settings, they are pre-pro-
grammed.
Storing/editing the connection settings
(obtainable from your network operator or any WAP™ portal)
To create a new profile (up to 10 profiles can be stored):
34
1
Press and hold
2
A beep will sound and the display will show the recording time left.
The recording will then start.
A second beep will sound if the end of the recording time has
been reached.
3
Press Stop
4
If the memory is nearly full when starting a new recording you are asked to erase the previously
recorded voice memo.
Select Yes to do so and proceed as for point 2 in the previous item.
Select No if you do not wish to delete the previously recorded memo.
When dealing with a phone conversation you can only record one person at a time.
1
Press
to play what has been recorded. The display will show
the remaining recorded time.
A beep will sound at the end of the memo.
2
Press Stop
4
You can stop the memo playback at any time by pressing Stop.
Press Erase
1
Select Yes to confirm your choice. Confirmation will be displayed.
2
3
Press Exit
1
Press
. Select Internet.
Select Profile list. Choose an empty profile ([...]) and select
2
New
.
3
Edit a profile name then press OK
appear. After a while, the menu associated with the new profile
name is displayed.
4
Select Gateway settings, and edit an IP address (mandatory)
.
or
to end the recording.
or
to return to the standby display.
during memo playback or recording.
to return to the standby display.
to validate. Stored will