Mitsubishi TRIUM ECLIPSE User Manual page 69

Select Phone settings. Select Auto features.
2
3
Select Auto-retry.
Select On or Off.
4
Press Exit
5
When activated, Auto-retry and a countdown timer to the next call
attempt will appear in the display. An auto-retry warning tone will
sound each time a new call attempt is made.
If the automatic redialling is successful proceed with the call as
normal. Pressing Exit
cancel auto-retry and end the dialling process for that call.
Auto Switch On/Off
This feature enables you to automatically program the phone to switch On
or Off at pre-determined times.
To set a Switch On or Off time,
1 Press
2 Select Phone settings. Select Auto features.
3 Select Auto-switch-off or Auto-switch-on.
4 Select On or Off.
(If a previous time has been entered it will be displayed)
5 Enter a new time or accept the previous one. Press OK
Stored will briefly be displayed.
6
Press Exit
At the switch-on time the phone comes on in the normal way. Enter the
lock or PIN code if required.
If the phone is already on at the switch-on time no action occurs.
If the phone is set to switch-off, the display will show a warning message
Switch-off in with a countdown timer showing the time to switch off.
Pressing Exit
If the mobile is already off at the switch-off time no action occurs.
4
- Remember to turn off the Switch-on alarm feature
Caution
when boarding an aircraft where the use of mobile phones is not
permitted and is illegal. Alternatively you can remove the battery
after turning off the phone.
See the General safety warnings in First Steps with your Eclipse.
Default (factory) settings
Use the Settings menu to return the phone settings back to the factory
settings. This has no effect on the phonebook entries or phone lock code.
1
Press
or to return to the standby display.
. Select Settings.
or to return to the standby display.
will cancel the switch off process.
The Auto Switch-off and Switch-on times cannot be the same. If a call is connected at the time of
switch-off, the switch-off process is postponed until the call is terminated.
. Select Settings.
or any key during the retrying process will
.
29