Broadcast - Cell Broadcast (Cb) Messages - Mitsubishi TRIUM ECLIPSE User Manual

Outgoing
Incoming - All incoming
4 Select the option using
Select Activate. Enter the password and press OK
5
The network will confirm the selection.
Press Exit
6
To take off or check the status of a call bar,
1
Press
Select GSM Services. Select Call barring.
2
3
Use
the Status and press
If choosing to take off a call bar the password will be required.
Press Exit
4
To change the password
1
Press
Select GSM Services. Select Call barring.
2
Select Change password.
3
The old password will be requested followed by two requests to
enter the new password. Confirmation will be displayed.
4
Press Exit

Broadcast - cell broadcast (CB) messages

These are messages broadcast by the networks to all GSM users and may provide
general information about local area dialling codes, weather reports and traffic
news etc. Each type of message is numbered enabling you to select the type of in-
formation you want to receive. Up to 5 different types of messages can be pro-
grammed into your selection list but only one can be displayed at any one time.
There are 16 standard message types pre-programmed into the phone to select
from. New message types can be programmed into the selection list using the
3 digit cell broadcast type number. Contact your service provider for details on the
number and types of messages broadcast.
Before you can turn on the broadcast service you have to put at least one message
type into the selection list.
Select
- All outgoing
- Int'nal calls
- Int'nal excl.
home
- Roaming
only
or to return to the standby display.
. Select Settings.
or to select the bar to be taken off (Cancel) or check
.
or to return to the standby display.
,
. Select Settings.
or to return to the standby display.
Meaning
All outgoing calls will be barred
All outgoing international calls
only will be barred
All outgoing international calls
except to other subscribers
within your home network
All incoming calls will be barred
All incoming calls when not on
the home network
. Press Select
or .
.
35