Table of Contents
Advertisement
Internet/Wireless Application
Protocol (WAP™)
The Eclipse has a WAP™ internet browser to access services, such as stock buying,
news, sports, weather, TV listings etc., supplied by your operator and/or your in-
ternet provider.The types of services offered depend on the internet pro-
vider and network operator.
You must have a DATA subscription to access these services.
Also check with your network operator whether the connection settings have been
pre-programmed into the phone prior to delivery or whether you have to manually
enter and store the settings yourself.
In either case once the settings have been stored you can start using this feature
as required and described below.
Creating and editing GPRS access point names for
WAP™ connections*
To create GPRS access point name dedicated to WAP™ connections (only
possible if GPRS services are available in your part of the country and with-
in your subscription),
To modify GPRS access point dedicated to WAP™ connections,
* GPRS availability is operator dependent
54
4
Access to the connection settings may depend upon whether the settings have been pre-program-
med into the phone prior to shipment from the factory. In some cases and to avoid errors these
settings may be 'Locked' and not be user programmable.
1
. Select Internet.
Press
Select Settings. Select Access point names.
2
3
The access points list appears. Select an empty entry ([...]) and
press New
4
Enter the access point Alias and press OK
5
Enter the access point Full name and press OK
6
Enter the Login name for this access point and press OK
7
Enter the Login password for this access point (each character
will turn into a star (*) after a short while) and press OK
8
Press End
9
Press Exit
1
. Select Internet.
Press
Select Settings. Select Access point names.
2
3
The access points list appears. Select an entry and press
Options
/Edit.
Edit the Alias, the Full name, the Login name and/or the
4
Login password. Confirm each entry by pressing OK
5
Press End
6
Press Exit
.
, then select Yes to confirm data storage.
or
to return to the standby display.
, then select Yes to confirm data storage.
or
to return to the standby display.
.
.
.
.
.
Advertisement
Chapters
Table of Contents
