Time & Date Setting - Mitsubishi TRIUM ECLIPSE User Manual

phone will flash green, the backlight will come on and the flashing
will be shown. If the ring tone volume is set to zero (off) or 'Vibrate', no
audible sound will be heard.
To accept (answer) the call:
Press
To reject or return the busy signal to the caller,
Press
To end the call,
Press
Time & Date setting
Two clocks are managed by the phone:
• The Origin clock: corresponding to the time and date used for all processing in
the phone.
• A Secondary clock: indicates the time of another part of the world.
Three settings are managed for each clock:
• The time difference with GMT.
• The daylight saving rule: two values are available, Winter time and Summer
time (+1hr).
• A town to identify a place.
To set the time and/or date of the Origin clock:
18
.
Pressing No ring
to silence the phone and go out of a room before pressing
wish to use the the hands free mode in the same time, press Speak-
on
.
When accepted
mal way.
• If the callers number is not available Unknown number will be dis-
played during call presentation; then Call1 will be displayed during
call connection.
• If the callers number is available but does not match one stored in
your phonebook it will appear in the display. If it does match a
stored number then the associated name will appear instead.
• If the caller has withheld their number Withheld number will be
displayed during call presentation; then Call 1 will be displayed
during connection.
• A call timer will also appear.
• will appear if the call has been received on your line 2 number.
.
.
The caller's number, if available will be stored in the received calls log.
1
Press . Select Office Tools.
2
Select World clock and press Options
Select Edit Origin.
3
will stop the sound of the ring tone allowing you
will be displayed. Proceed with the call in the nor-
. If you
.