Ending A Call; Turning Off The Phone - Mitsubishi TRIUM ECLIPSE User Manual

Receiving a call
When a call is received, the phone will ring. The LED on the top of the
phone will flash green and the flashing
will also come on if the phone was set to do so or if in silent mode.
To accept (answer) the call:
To reject, or return the busy signal to the caller:

Ending a call

Turning off the phone

A switch off tone will sound to confirm your action. During switch off a
display animation will be shown. The mobile will then turn off.
10
Press .
4
If the ring tone volume is set to zero (off) or if the phone has been set to 'Vibrate' mode, no audi-
ble sound will be heard.
Press .
Press .
4
Waiting a few seconds or pressing the Exit softkey will return to the standby display.
Press and hold down
4
Do not turn off the phone by removing the battery as data which may need to be saved in the SIM
will be lost. Should this happen, the display may show a first-aid kit symbol for a few seconds at
the next power on. This is quite normal. The standard display will show afterwards.
.
will be shown. The backlight