Panasonic WV-CS650 Operating Instructions Manual page 36

4. Hook the Fall prevention wire on the camera
mounting angle.
Be sure to match the wire with the fall
prevention wire fixing angle as shown below.
Ring of the
Fall Prevention
Wire
5. Mount the camera on the camera mounting
angle and rotate the camera clockwise.
6. Tighten the fixing screw M3 (provided).
Notes :
1. Tighten the camera fixing screw with a
screwdriver.
Fall Prevention
Wire Fixing Angle
15
2. Follow the instructions given here to
ensure that the camera and camera
mounting angle are installed safely.
3. When removing the camera from the
camera mounting angle, loosen and
press up the camera fixing screw (M3)
by using a screwdriver.
7. Fix the decoration cover to the camera
mounting angle.
a. Sideway cable exit
Pass the cables through the cutout made in
the diecast case and decoration cover (refer
to item a, INSTALLATION).
b. Top cable exit
Push the decoration cover against the
camera mounting angle.
When using the optional bracket for
mounting refer to the Operating instruction
for the WV-Q105, WV-Q106, WV-Q107 or
WV-Q108.
- 33 -