Panasonic WV-CS650 Operating Instructions Manual page 17

Preset ID Setting
1. Move the cursor to PRESET ID and move the joystick to the left or
right to select ON or OFF.
ON: Preset ID is displayed on the screen.
OFF: Preset ID is not displayed.
2. To edit the camera identification to be changed
Move the cursor to PRESET ID and press the CAM (SET) key to
display the set menu.
To edit the PRESET ID displayed on the screen
Move the cursor to the character you want to change by
using the joystick, and press the CAM (SET) key. The
selected character appears in the editing area. (The pointer
in the editing area moves to the right automatically at this
moment.) To enter a blank, select SPACE.
Repeat the above procedure until all characters are edited.
To copy a preset ID from another position
Move the cursor to COPY and press the CAM (SET) key. The
preset ID in the immediately preceding position is shown.
Each consecutive operation of the CAM (SET) key displays
the ID preceding the one currently displayed.
To change an edited PRESET ID
1. Move the pointer to the character to be edited in the editing
area by using the joystick, and press the CAM (SET) key.
2. Select a new character by using the joystick.
3. Press the CAM (SET) key to determine the PRESET ID.
Preset ID setting menu
SPACE
COPY POSI RET RESET
DOOR............
- 14 -
Preset setting menu
PRESET NO.15*H
POSITION SET
PRESET ID
ALC/MANUAL
DWELL TIME
SCENE FILE
RET DEL
Character Cursor
PRESET NO.15*H
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$
ÄÜÖÆÑÅ
Pointer
PRESET NO.15*H
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$ÄÜÖÆÑÅ
SPACE
COPY POSI RET RESET
DOOR............
PRESET NO.15*H
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$ÄÜÖÆÑÅ
SPACE
COPY POSI RET RESET
DOOR............
ON
ALC
2S
1
Character
Area
Command
Editing
Area