Konica Minolta BIZHUB C352P User Manual page 50

2
No. Part Name
1 Main unit
2 Paper Feed Cabinet PC-103
3 Paper Feed Cabinet PC-203
4 Paper Feed Cabinet PC-403
5 Finisher FS-514
6 Output Tray OT-601
7 Punch Kit PK-510
8 Mailbin Kit MT-501
9 Saddle Stitcher SD-503
10 Dehumidifer Heater 1C*
11 Mount Kit MK-706*
12 Local Interface Kit EK-702*
13 Security Kit SC-503*
14 Hard Disk Drive HD-501*
* Parts marked with an asterisk (*) are internal options and therefore are not shown in the
illustration.
2-24
Installation and operation precautions
Description
The data sent from the computer is printed.
Referred to as the "machine", the "main unit", or
the "C352P" throughout the manual.
The top tray can be loaded with up to 500 sheets of
paper, and the bottom tray can be used as storage.
Referred to as the "single paper feed cabinet"
throughout the manual.
Both the top and bottom trays can each be loaded
with up to 500 sheets of paper.
Referred to as the "double paper feed cabinet"
throughout the manual.
Can be loaded with up to 2,500 sheets of paper
Referred to as the "LCT" throughout the manual.
Feeds out finished printed pages. The "Sort" set-
ting (separating by copy set), "Group" setting (sep-
arating by page), and Staple settings (corner
stapling and two-point stapling) are available.
Referred to as the "finisher" throughout the manual.
Print output tray installed onto the finisher and used
for separating printed pages
Referred to as the "optional finishing tray" through-
out the manual.
Allows hole punching to be used if installed onto
finisher
Referred to as the "punch kit" throughout the man-
ual.
Installed onto the finisher to divide printed pages
and feed them into the appropriate tray assigned to
a specific individual or group
Referred to as the "mailbin" throughout the manual.
Installed onto the finisher so that prints can be
bound or folded at the center
Referred to as the "saddle stitcher" throughout the
manual.
Installed in the paper feed cabinet to prevent hu-
midity from collecting in the paper
Required to mount the local interface kit
Used for making a local connection between this
machine and the computer
Installed to encode the data saved on the hard disk
so that the hard disk can be used more safely.
Operations using the "Secured Print" and "Save in
User Box" settings can be used if the hard disk
drive is installed.
Referred to as the "HDD" throughout the manual.
C352P (Phase 3)