Punching Holes In Prints (Punch Settings) - Konica Minolta BIZHUB C352P User Manual

6

Punching holes in prints (Punch settings)

Holes for filing can be punched in the prints.
!
Detail
In order for holes to be punched in the prints, all of the following
conditions must be met.
- The paper width must be between 182 mm and 297 mm
- The paper length must be between 182 mm and 432 mm
Note
The Punch settings are available only if the optional finisher and punch kit
are installed.
The number of punched holes differs depending on the country (region)
where the unit is installed. For details, consult your technical
representative.
Paper Weight
2
50 g/m to 209 g/m
6-24
Paper Size
2
A3 w, A4 v, B5 w
Loading copy paper
C352P (Phase 3)