Konica Minolta BIZHUB C352P User Manual page 410

9
4
Lower guide FN3, and then pull out
any paper.
– If the punch kit is installed, pull
out the hole-punch waste
container FN3.1.
5
Return guide FN3 to its original position.
– If the punch kit is installed, insert the hole-punch waste container
FN3.1 into its original position.
6
Turn dial FN4 to feed the paper, open
the transport unit cover, and then
pull out any paper.
7
Turn dial FN5 or dial FN6, and then
pull out any paper.
9-36
Troubleshooting
C352P (Phase 3)