Fold & Staple; Hole Punching - Konica Minolta BIZHUB C352P User Manual

4
Fold & Staple
You can select if printed documents will be folded or stapled at the center.
1
Click the Layout tab.
2
From the drop-down list, select the folding method.
– In addition to "Fold & Staple" for folding copies in half and stapling
them, "Center Staple" for stapling the copies at the center and
"Fold" for folding the copies in half are available.
Note
The "Fold & Staple" check box cannot be selected if the "Staple" or
"Hole-Punch" check box has been selected.
The "Fold & Staple" check box is available only if the optional finisher and
saddle kit are installed.

Hole punching

Holes can be punched into the printed document.
1
Click the Layout tab.
2
From the "Hole-Punch" drop-down list, select the number of punched
holes.
Note
The "Hole-Punch" check box is available only if optional finisher FS-514
and punch kit PK-510 are installed.
Note
Depending on the selected Binding Position setting, different hole-
punching positions are available.
4-66
Specifying printer driver settings
C352P (Phase 3)