Creating A Box (Secure Folder) - Konica Minolta BIZHUB PRO 920 Scanner Manual

9
9.2

Creating a Box (Secure Folder)

How to create a box
After being transmitted from the print controller, a print job configured as se-
cure output is stored in a Secure box.
0 The Box Name and Password inputted by the following procedure is
used in the Secure Print of printer feature. For more information on se-
cure output, refer to the optional user manual (Printer).
1
Press [Box] on the control panel and
then press [Recall] key.
2
Press the [Secure] key.
3
Press the [New Box] key.
4
Press the [Box Name Input] to dis-
play the character input screen. En-
ter any Box Name.
– If you do not register a Box
Name, a Box Number becomes
the Box Name.
– You cannot use the Secure Box Name already registered.
– Input a Box Name within 8 characters in alphameric characters and
signs.
– For more information on how to input characters, refer to "How to
Input Characters" on page 3-7.
9-4
About the Secure Folder
bizhub PRO 920 Scanner