Konica Minolta BIZHUB PRO 920 Scanner Manual page 121

Using the Network Scanner Features
6
Press the Name of the destination
FTP server.
– You can refine the registered
destination by the search func-
tion. For more information on
how to search, refer to "How to Search" on page 3-8.
– You can refine the Name by the search function. For more informa-
tion on the search function, refer to "The keys on the Select Desti-
nations/Storage Locations Screen" on page 7-3.
– To deselect the Name, press the selected Name again.
– If you input a destination manually, refer to "When an FTP server is
Input Manually" on page 7-14.
7
Press the [Scan Setting] key.
The Scanner Setting Basic screen
appears.
8
Configure the necessary items.
– For more information on the con-
figurations on the Scanner Set-
ting Basic screen, refer to "About
the Scanner Setting Basic
Screen" on page 7-22.
9
Set an original and press the [Start] button.
– The original is scanned, and the scanned data are sent to an spec-
ified destination.
10
To continue transmission, go back to
the step 8 and repeat the procedure.
To stop scanning, press [Address].
– Then, the Select Destination/
Storage Locations screen re-
turns.
– When a lot of original is scanned, [Job Reserve] is indicated on the
screen during the scanning process.
– You can press [Job Reserve] and set the next job. Immediately
upon completion of the previous job, you can set the original and
press the [Start] button.
bizhub PRO 920 Scanner
7
7-13