Konica Minolta BIZHUB PRO 920 Scanner Manual page 65

About the Copied Data Processing Features
HDD to PC
You can transmit copied data stored on the HDD-A to a computer to store
them by using PageScope JobEditor/PageScope JobEditorServer or FTP/
SMB.
Set up the data transmitting method to PC beforehand.
!
Detail
For information on changing data transmission method to PC, refer to
"Changing Data Transmission Method to PC" on page 4-29.
PageScope JobEditor and PageScope JobEditorServer for USA are ex-
cluded.
Transmit copied data stored on the HDD-A to a computer in the follow-
ing steps
1
Press [Box] on the control panel and
then press [Store] key.
2
Press the [HDD to PC] key.
– Data is transmitted by the follow-
ing methods:
– Transmit to PC
– Operate on PC
– FTP/SMB
– To set the transmission method, press [Change Data Send Sys-
tem].
– For more information, refer to "Changing Data Transmission Meth-
od to PC" on page 4-29.
3
Select a Folder.
– When you select a Personal Fold-
er
– Press the [Personal Folder] key to
display the list. Select any folder
and press the [OK] key.
– If a Password is configured for the Personal Folder, the Password
input screen appears. Enter the Password.
bizhub PRO 920 Scanner
4
4-23