Configuring Destination for the Network Scanner Features
6.3
Registering the HDD-B
If you want to store the scanned data on the HDD-B, you need to register
boxes on the HDD-B. The registration is done in the following steps.
!
Detail
For more information of HDD-B to be used, refer to "About the HDD" on
page 2-3.
For E-Mail/FTP/HDD/SMB, destinations can be registered as many as
500 in sum.
How to register the HDD
1
Press the [Scan] on the control panel.
2
Press the [HDD] key.
–
In the initial settings, the Select
Destinations/Storage Locations
screen (E-Mail) is displayed. For
information on the initial settings
of the Scan screen, contact your administrator of the copier.
3
Press the [Address Input] key.
–
If the Box Number is already reg-
istered, the Name is displayed.
–
In the initial settings, such index
keys as [A-C] and [D-F] are dis-
played.
–
On how to edit/delete a registered Box Number, contact your ad-
ministrator of the copier.
The Address Input screen appears.
4
Configure the necessary items on the
Address Input screen. Pressing an
each item displays the character in-
put screen.
–
For more information on how to
input characters, refer to "How to Input Characters" on page 3-7.
–
If you want to use this copier as a scanner, it is recommended that
an administrator assigns a Box Number to each user and informs
the assignment by an E-Mail in advance.
–
The Box Number can protect each user's data.
bizhub PRO 920 Scanner
6
6-7