Konica Minolta BIZHUB PRO 920 Scanner Manual page 142

8
Reading in Scanned Data
To read in scanned data, you should follow these steps:
1
Run the TWAIN-compliant application (Adobe Acrobat 5.0).
2
Select [File] - [Import] - [Scan].
[Adobe Acrobat Scan] window will appear.
3
Choose [KONICA MINOLTA Scanner
Driver] from the [Device] pull-down
menu and click [Scan].
– From the [Format] pull-down
menu, choose [Single sided] or
[Double sided], as required. Also,
choose [Current Document] or
[New Document] into which
scanned data to be taken in.
– When you operate this process for the first time, the [Scanner Box
No. Setting] window appears. Go to the step 4.
– If the settings for scanning are already done, the [Scanner Selec-
tion] window appears. Go to the step 5.
4
In the [Scanner Box No. Setting] win-
dow, input a [Scanner Server name
(IP address)] to which you connect, a
[Scanner Name] for identification by
the driver, a [Box No.] specified when
an original was scanned, a [Pass-
word] configured for the Box No.,
and click the [OK]. Go to the step 6.
– Once you configure the scanner
settings, this window does not
appear the next time.The [Scanner Selection] window (step 5) ap-
pears.
– To scan with another scanner, click the [Add] in the [Scanner Selec-
tion] window.
– For a Scanner Server name (IP address), input the IP address of the
print controller. For more information, contact your administrator.
– You cannot use a DNS name or a NetBIOS name for a Scanner
Server name (IP address).
– Multiple computers cannot access to one box simultaneously.
– At maximum, 5 computers can connect to one scanner simultane-
ously.
The [KONICA MINOLTA Scanner Driver] window appears.
8-8
About the Network Scanner Driver
bizhub PRO 920 Scanner