Konica Minolta BIZHUB PRO 920 Scanner Manual page 64

4
4
Set an original and press the [Start] button.
The transmitting screen and the continuous storage confirmation
screen appears.
5
Connect to the copier through PageScope JobEditor installed on the
computer, and store the copied data. PageScope JobEditorServer re-
ceives data automatically.
– For more information on how to operate PageScope JobEditor, re-
fer to "PageScope JobEditor" on page 11-3.
– For more information on how to operate PageScope JobEditorS-
erver, refer to "PageScope JobEditorServer" on page 11-9.
– PageScope JobEditor and PageScope JobEditorServer for USA
are excluded.
– About how to obtain PageScope JobEditor and PageScope
JobEditorServer, contact your service representative.
6
To continue storing data, press the [Yes] key. To finish storing data,
press the [No] key.
– Pressing the [Yes] key displays the setting screen. Return to the
step 3 and repeat the procedures.
4-22
About the Copied Data Processing Features
bizhub PRO 920 Scanner