Konica Minolta BIZHUB PRO 920 Scanner Manual page 72

4
Transmit to PC
If you configure the automatic transmission to a PC, the computer specified
on the copier can automatically receive copied data through PageScope
JobEditorServer.
!
Detail
An administrator needs to specify the IP Address of the target computer
on the copier. For more information, contact your administrator.
For more information on PageScope JobEditorServer, refer to "Page-
Scope JobEditorServer" on page 11-9.
PageScope JobEditor and PageScope JobEditorServer for USA are ex-
cluded.
About how to obtain PageScope JobEditor and PageScope JobEditorS-
erver, contact your service representative.
Configure the automatic transmission to the PC in the following steps
1
Press [Box] on the control panel and
then press [Store] key.
2
Press the [Change Data Send Sys-
tem] key.
3
Press the [Transmit to PC] key.
– If you have not specified a target
computer on the copier, you can-
not select the [Transmit To PC]
key. For more information, con-
tact your administrator.
4
Press the [OK] key to close the screen.
4-30
About the Copied Data Processing Features
bizhub PRO 920 Scanner