Konica Minolta BIZHUB PRO 920 Scanner Manual page 67

About the Copied Data Processing Features
6
Select FTP or SMB, select where to
send and press [Setting Screen].
– For information on selecting des-
tination, refer to "Transmission to
the FTP server" on page 7-12 or
"Transmission to the SMB server" on page 7-16.
– Both the FTP and SMB can be transmitted at the same time.
7
Confirm the File Name, FTP Address, SMB Address and select File
Form and press [OK] key.
– If a file name longer than 21 characters has been set for the file,
characters on the 21st and on are automatically deleted so that the
file name is changed to 20 characters.
Data start to be transmitted to the computer.
The transmitting screen and the continuous storage confirmation
screen appears.
8
To continue transmitting data, press the [Yes] key. To finish the trans-
mission, press the [No] key.
– Pressing the [Yes] key displays the file list screen. Return to the
step 5 and repeat the procedures.
bizhub PRO 920 Scanner
4
4-25