Specifying The Setting For "Power Save Mode; Specifying The Setting For "Density (Adf) - Konica Minolta 7416CG User Manual

5

Specifying the Setting for "POWER SAVE MODE"

1
Select "POWER SAVE MODE".
H Refer to "Selecting the "MACHINE SETTING" Menu" on page 5-2.
2
Use the 10-Key Pad to specify the
desired length of time until the
copier enters Power Save mode.
Tip
The timer can be set between 1
min and 240 min.
If an incorrect value is entered,
press the [No] key, and then
enter the correct value.
3
Press the [Yes] key.

Specifying the Setting for "DENSITY (ADF)"

1
Select "DENSITY (ADF)".
H Refer to "Selecting the "MACHINE SETTING" Menu" on page 5-2.
2
Press the [ ] and [ ] keys to select
either "Mode 1" or "Mode 2".
3
Press the [Yes] key.
5-4
Ö
Ö
Using the Utility Mode
DENSITY SET
7416CG