Placing The Original On The Original Glass; Precautions For Placing The Original On The Original Glass - Konica Minolta 7416CG User Manual

Before Making Copies

Placing the Original on the Original Glass

The method for positioning the original differs depending on the type of
original being used.

Precautions for Placing the Original on the Original Glass

Care should be taken when positioning the following types of originals.
An original of a nonstandard size:
G The document size cannot be detected automatically. Press the
[Paper size] key or the [Zoom] key, and then select the desired paper
size (p. 4-3) or zoom ratio (p. 4-9).
A highly transparent original (OHP transparencies, translucent paper,
etc.):
G
Place a blank sheet of paper of the same size over the original.
A book or other three-dimensional object:
G
Let the machine scan the contents of the original with the Original
Cover or the Auto Document Feeder raised. Do not attempt to push
the Original Glass with excessive force, as a malfunction could result.
(The maximum load resistance of the Original Glass is 3 kg.)
Note
While scanning with the Auto Document Feeder or Original Cover
open, do not look directly at the bright light that may shine through the
Original Glass. Although the light that shines through the Original
Glass is bright, it is not a laser beam and, therefore, is not as
dangerous.
7416CG
3
3-23