Loading Paper Into Tray1 - Konica Minolta 7416CG User Manual

3

Loading Paper into Tray1

1
Remove the Bypass Tray.
2
Load the paper into the tray so that
the front side of the paper (the side
facing up when the package was
unwrapped) faces up.
3
Slide the paper guides against the
edges of the paper.
H If Legal-size paper is installed,
open the door of Tray1.
4
Attach the Bypass Tray in its
original position.
Note
If paper with a different size or type
is loaded, various settings must be specified from the "PAPER
SOURCE SETUP" menu in the Utility mode. If the settings are not
correctly specified, paper size error may occur. For details, refer to
"Specifying the Setting for "TRAY SETTING"" on page 5-11.
3-18
Before Making Copies
When Legal-size paper
is installed
7416CG