Specifying The Setting For "Energy Save Mode; Specifying The Setting For "Density (Adf) - Konica Minolta 7416CG User Manual

Using the Utility Mode

Specifying the Setting for "ENERGY SAVE MODE"

Select "ENERGY SAVE MODE".
1
Refer to "Selecting the "MACHINE SETTING" Menu" on page 5-3.
Use the 10-Key Pad to specify the
2
desired length of time until the
copier enters Energy Save mode.
Tip
The timer can be set between 1
min and 240 min.
If an incorrect value is entered,
press the [No] key, and then
enter the correct value.
Press the [Yes] key.
3

Specifying the Setting for "DENSITY (ADF)"

Select "DENSITY (ADF)".
1
Refer to "Selecting the "MACHINE SETTING" Menu" on page 5-3.
Press the [ ] and [ ] keys to select
2
either "Mode 1" or "Mode 2".
Press the [Yes] key.
3
7416CG
Ö
Ö
5
5-5