Loading Paper; Loading Paper Into Tray1 - Konica Minolta bizhub 215 User Manual

3.4

Loading paper

3.4 Loading paper
This section describes how to load paper into each paper tray.
For the types of paper to be used, refer to page 8-2.
3.4.1

Loading paper into Tray1

1
Pull out Tray1.
1. Paper take-up roller
NOTICE
Be careful not to touch the surface of the paper take-up
roller with your hand.
2
Press down the lifter plate until it "clicks" into position.
2. Lifter plate
3
Load paper.
% Be sure to load the paper below the tab, so that the
stack height does not exceed the , mark.
4
Adjust the lateral guide to the size of the paper.
% Push the lateral guide firmly up against the edges of the
paper.
5
Reset the tray.
bizhub 215
3
3-7