Konica Minolta BIZHUB PRO 1050E Operator's Manual page 546

13
Procedure
1
Touch [Adjustment] - [02 Finisher Adjustment] - [06 Perfect Binder Ad-
justment].
2
Touch [05 Pasting Finish Position Adjustment] to display the Pasting
Finish Position Adjustment Screen.
3
Touch [Go Ahead] or [Go Back] to select the direction to finish pasting.
4
Touch [Next] or [Back] to select the paper size of the body set.
Touching [Next] continuously will change the paper size as follows.
All Size - 8.5x11 - A4 - B5 - A5 - 5.5x8.5 - 16K - A4W - B5W - A5W -
8.5x11W - 5.5x8.5W - Special
5
Touch the [COPY] tab to display the Copy Screen.
6
Select the PB tray or desired main body tray, then press [Start].
A sample pattern of perfect-bound book will be output.
7
Check that the pasting on the body set finishes in proper position.
8
If the desired result cannot be obtained, touch the [ADJUSTMENT] tab.
9
Use the touch panel keypad to enter the desired adjustment value, then
touch [Set].
Available range: -128 (early) to +127 (late), 1 step = 0.1 mm
10
Repeat the adjustment steps from 3 to 9 until the desired result is ob-
tained.
13-88
Finish position of
frontward pasting
Adjustment
Body pages
Finish position of
backward pasting
bizhub PRO 1050/1050e