Konica Minolta BIZHUB PRO 1050E Operator's Manual page 992

20
Copies skew in the stapled sets
- Check to see if copy paper is excessively curled in the tray. Reload the
copy paper upside down.
- Check to see if large-sized copies meet the secondary (sub) tray when
fully output before being stapled. Release the lock of the secondary (sub)
tray, then slightly lift it upward.
Using punch, copies cannot be punched
- Check to see if the Punch Dust indicator lights in red on the Machine Sta-
tus Screen.
- Empty the trash basket.
Copies cannot be stapled or punched in position
Check to make sure the side guide plates are securely aligned to the copy
paper in the paper tray to be used.
Using trimming, copiers cannot be trimmed
- Check to see if the Trim Dust indicator lights in red on the Machine Status
Screen.
Empty the dust box of saddle stitch, or contact the machine manager.
Usint Perfect binding, copies cannot be bound
- Check to see if the front door of perfect binder, perfect binder tray cover
or paste hopper cover is open.
Securely close the front door/perfect binder tray cover/paste hopper cov-
er.
20-18
Troubleshooting
bizhub PRO 1050/1050e