Setting Binding Direction For Duplex Copies - Konica Minolta BIZHUB PRO 1050E Operator's Manual

Setting Output Methods
9.3

Setting Binding Direction for Duplex Copies

When setting duplex mode (simplex % duplex / duplex % duplex), a binding
direction must be selected. It should be set when making duplex copies with
upper binding (front and back sides have the opposite side up) from simplex
or duplex originals of right/left binding (front and back sides have the same
side up).
Note
If you want to make duplex copies with of right/left binding (front and
back sides have the same side up) from duplex originals with upper bind-
ing (front and back sides have the opposite side up), settings for duplex
originals and binding direction are needed. For details, refer to "Specify-
ing Original Direction" on page 6-10.
Specifications for Binding Direction:
- Upper binding for duplex printing is available only when duplex mode is
selected.
- If the machine is reset, the binding mode will go back to right/left binding.
bizhub PRO 1050/1050e
Originals
Binding Direction for Duplex copying
R&L Upper
Copies
9
9-13