Searching For Digital Terrestrial Tv Channels Automatically - Grundig FineArts ­55 ­FLE ­9170 ­SH User Manual

SpECIAL­SEttINGS
Searching­for­television­channels­
from­the­cable­provider­manu-
ally
1 Open the menu with »mENu«.
2 Select the line »SOURCE SETUP« with »
or » « and press »oK« to confirm.
Λ
– T he »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
and press »oK« to confirm.
Select the option »Cable« with »
» « or » « and press »oK« to confirm.
v Λ
4 Select » Digital Manual Tuning« with »
» « and press »oK« to confirm.
Λ
– T he menu appears.
5 Enter the four-digit frequency with »1­...­0«
and press »oK« to confirm.
– T he search starts after confirming, the
channels found are displayed in the »Re-
sults« menu.
6 Press »mENu« to finish the setting.
­ - ---------------------------------------------------------------------------------------------------------
Searching­for­digital­terrestrial­
tv­channels­automatically
1 Open the menu with »mENu«.
2 Select the line »SOURCE SETUP« with »
or »
«
v
– T he »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
or »
« or » «
v Λ
Select the option »Air« with »
»
< > Λ
«, » «,
Caution:
« or
The antenna power supply (line »Active
v
7
Antenna Power«) may only be switched on
if the antenna is an active indoor antenna
with a signal amplifier and it is not already
s upplied with a voltage via a mains plug
(or similar supply). Otherwise you may
cause a short circuit and irreparably dam-
age your antenna.
4 Select the »Active Antenna Power« with »
or »
for the antenna with »
5 Select the line »Automatic Channel Search«
with »
– T he menu appears.
« and press »oK« to confirm.
Λ
« and press »oK« to confirm.
Λ
« and press »oK« to confirm.
«. Switch on the antenna power supply
Λ
<
« or »
« or » « and press »oK« to confirm.
v Λ
SOURCE SETUP
AUTOMATIC CHANNEL
Connection Type
Country
Scan Type
Exit
Back
«
v
«
v
< >
«, » «, » « or
v
«
v
>
« (»On«).
20.09.2010
15:46
SEARCH
Air
U.K.
DTV & ATV
Start Search
­ 6 7
ENGLISH