Grundig FineArts ­55 ­FLE ­9170 ­SH User Manual page 31

SmArt­INtEr@CtIvE­tv­AND­HomE­NEtworK
wireless­network­connection
1 Connect Grundig WiFi USB dongle to the
»uSB1« or »uSB2­(HDD)« socket of your
television in order to connect the television
to a wireless network.
­ 3 2
ENGLISH
Notes:
The GRUNDIG Wireless WiFi Adapter sup-
7
ports IEEE 802.11 B/G and N communica-
tion protocols. We recommend you to use
IEEE 802.11N protocol to obtain the best
performance in HD video playback.
If you use a modem that supports IEEE 802.
7
11B/G, video playback performance may
be poor when compared to a modem that
supports IEEE 802.11N since the data
transfer rate of IEEE 802.11B/G protocol
is lower.
Please note that video playback performance
7
in a DLNA application on a wireless local net-
work and in a smart Inter@ctive TV applica-
tion on a network with internet connection de-
pends on the number of users on the network
as it is the case in every wireless network.
It is recommended to switch off the equip-
7
ment that are not in use in home network in
order to avoid unnecessary network traffic.
Placing the modem or wireless network shar-
7
er on an elevated location will increase the
wireless connection reception strength.
Wireless connection reception strength may
7
vary depending on the type of the modem,
the distance between the modem and televi-
sion and the distance between the device
used as a DMS for DLNA application and
the modem.
Modem must be transmitting its SSID in order
7
to establish a wireless connection. Television
can not connect to a network without SSID.
When network connection is established
7
through a wireless USB network device,
wireless network connection may be
weak depending on the the strength of the
wireless network in the medium. Extending
the wireless USB network device close to the
television with a USB extension cable will
increase the wireless network performance.
­