Table of Contents
Advertisement
SmArtINtEr@CtIvEtvANDHomENEtworK
wirelessnetworksettings
There are two ways of making the wireless net-
work settings.
A Automatic connection,
» Apart from Access Point Selection, all data
regarding the connection settings (»IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«)
are obtained from modem automatically.
B Manual connection,
a ll connection settings (»IP Address«,
»Netmask«, »Gateway« and »DNS«) must
be configured manually.
Automaticconnection
Most of the home networks are Dynamic. If you
have a dynamic network, you must use a DSL
modem that supports DHCP. Modems and IP
sharers that support DHCP obtain the »DNS«
values that are required for »IP Address«,
»Netmask«, »Gateway« and internet access
automatically, and thus you are not required to
enter those values manually.
1 Open the menu with »mENu«.
2 Select the line »INTER@CTIVE TV« with »
or »
« and press »oK« to confirm.
Λ
– T he »INTER@CTIVE TV« menu appears.
INTER@CTIVE TV
inter@ctive Applications
Network Settings
Connection Type
Select Access Point
Network Configuration
IP Address
DNS
Netmask
Gateway
Exit
Back
3 Select »Connection Type« with »
and then select »Wireless« with »
4 Select »Network Configuration« with »
5 Select »Select Access Point« with »
6 Select the network that you want to connect
7 Select the required character with »
«
v
dd.mm.yyyy
8 Start the registration to the home network by
hh:mm
OK
9 Press »
Wireless
N/A
AUTO
10.134.151.15
10.134.150.8
255.255.255.0
10 Press »mENu« to end the setting.
10.134.151.254
Connect
Test Connection
« or »
«
v
Λ
<
>
« or »
«.
»
« and then select »AUTO« with »
Λ
»
« and confirm with »oK«.
Λ
– » Select Access Point« menu appears and
available wireless networks are scanned
and displayed in the menu
<
with »
«, »
«, »
« or »
v
Λ
»oK«.
– W ireless connection password screen is
displayed.
<
>
»
« and »
« and move to the next character
with »oK«.
– S elect »ABC« for uppercase and »abc«
for lower case and confirm with »oK«.
– S elect »?@123« for numbers and symbols
and confirm with »oK«.
– E nter the password, select »Confirm« with
<
»
«, »
«, »
« or »
v
Λ
»oK«.
Note:
In WEP encryption system, more than one
7
network password can be assigned for the
network. Your television can only connect to
network with level 1 password.
pressing »
« (red).
– T he mesage »Connecting ... Please Wait«
appears.
« (green) to make sure that the
network connection is established with the
current settings.
– T he messages »Testing ... Please Wait«
appears, after successfull announcement
the messages »Connecting To Gateway:
Success« and »Internet Connection:
Success«.
Note:
If you do not have a dynamic network,
7
follow the instructions in manual connection
section.
« or
v
<
>
« or »
«.
« or
v
>
« and confirm with
«, »
«,
v
Λ
>
« and confirm with
3 3
ENGLISH
Hide quick links:
Advertisement
Table of Contents
