Changing The Picture Format - Grundig FineArts ­55 ­FLE ­9170 ­SH User Manual

tELEvISIoN­-­opErAtIoN
Changing­the­picture­format
The television automatically switches to the 16:9
format if this format is detected via the SCART
socket.
1 Open the Tools menu with »tooLS«.
2 Select the menu item »Picture Format« with
» « or » « and press »oK« to confirm.
v Λ
3 Select the picture format with »
press »oK« to confirm.
– Y ou can choose between the following
p icture formats:
»Auto«­format
The picture format is automatically switched to
»16:9« for 16:9 programmes.
The picture format is automatically switched to
»4:3« for 4:3 programmes.
»16:9«­and­»14:9«­formats
For programmes in 4:3 format, the picture is
stretched horizontally if the »16:9« format or
»14:9« format is selected.
The picture geometry is stretched horizontally.
With actual 16:9 input sources (from a set-
top box on the SCART socket) the picture fills
the screen completely and with the correct
g eometry.
»4:3«­format
The picture is shown in 4:3 format.
»LetterBox«­format­
The letterbox format is especially suitable for
programmes in 16:9 format.
The black borders which are usually at the top
and bottom of the screen are eliminated, 4:3 pic-
tures fill the screen.
The transmitted pictures are enlarged, but are
slightly cropped at the top and bottom. The pic-
ture geometry remains unchanged.
»Subtitle«­format
If you cannot see the subtitles at the bottom of
the screen, select »Subtitle«.
--------------------------------------------------------------------------------
»panorama«­format­
This setting is suitable for films in an especially
wide format.
During programmes in 4:3 format, the picture is
stretched horizontally if the »Panorama« function
is selected. The picture geometry is stretched
horizontally.
< > »overscan­off«­format
« or » « and
In this mode, HD pictures are not cropped by the
HDMI sockets or component sockets, and are
displayed in their original size. This only applies
in HDMI mode and for resolutions of 720p or
above.
Note:
7
Picture format selection is not supported in
3D mode.
­ 2 5
ENGLISH