Operation­as­a­pc­monitor; Connecting A Pc; Selecting Presets For The Pc; Settings For Pc Mode - Grundig FineArts ­55 ­FLE ­9170 ­SH User Manual

opErAtIoN­AS­A­pC­moNItor
Connecting­a­pC
1 Connect the »pC-IN« socket on the television
to the corresponding socket on the PC using
a VGA cable (video signal).
2 Connect the »Audio« socket on the televi-
sion to the corresponding socket on the PC
using a suitable cable (audio signal).
Note:
Adjust your PC to the monitor (for example,
7
picture resolution 1280 x 768, picture fre-
quency 60 Hz).
Selecting­presets­for­the­pC
1 Press »
« and use »
to select the preset »PC« and press »oK« to
confirm.
Settings­for­pC­mode
1 Open the menu with »mENu«.
2 Select the »SOURCE SETUP« menu item with
» « or » « and press »oK« to confirm.
v Λ
– T he »SOURCE SETUP« menu appears.
3­ Select the function or setting with »
» «, and then use »
Λ
implement it.
­ 6 4
ENGLISH
< >
«, » «, » « or »
v Λ
« or
v
< >
«, » « or » «, » « to
v Λ
­ - ---------------------------------------------------------
Source
Auto Ajust
Extended settings
Auto Ajust Mode
Position
Size
Phase
«
Options:
– » Auto Ajust« for automatic PC configura-
tion.
– » Auto Ajust Mode«, select the option
»On« if the configuration should be imple-
mented automatically in PC mode.
– » Position« to configure the horizontal and
vertical picture position.
– » Size« to set the cycle frequency.
– » Phase« to eliminate flicker, unfocused
pictures or horizontal interference.
4 Press »mENu« to end the setting.
SOURCE SETUP
PC
On
50H - 50V
0
30
Exit
Back
20.09.2010
15:46