Grundig FineArts ­55 ­FLE ­9170 ­SH User Manual page 27

3D­FuNCtIoN
Adjusting­2D­→­3D­effects
When you change 2D broadcasting to 3D, you
can adjust the most suitable effect depending on
your personal preferences.
1 Select »Effect mode« with »
set it to »On« with »
– » 3D Perspective« and »Depth« options
are activated.
2 Select »3D Perspective« with »
and adjust with »
3 Select »Depth« with »
the picture setting as »Low«, »Medium« or
<
»High« with » « or »
4 Press »mENu« to end the setting.
Left­-­right­Correction
When Frame Packing mode is enabled in HDMI
source, 3D perception may disappear in 3D
films or 3D games due to a synchronization shift
arising from HDMI signal. You may correct 3D
perception with this feature.
1 Select »Left-Right Correction« with »
» «.
Λ
< >
2 Press » « or » « to switch the function »On«.
Note:
Set the function to »Off« with »
7
3 Press »mENu« to end the setting.
­ 2 8
ENGLISH
­ - ------------------------------------------------------------------------------------------------------------------------
« or » « and
v Λ
< >
« or » «.
« or »
v Λ
< >
« or » «.
« or » « and select
v Λ
>
«.
« or
v
<
« or »
Formats­supported­by­HDmI­1.4
With HDMI 1.4, your TV can recognise and
play 3D content.
The formats supported are shown in the follow-
ing table.
For­Blu-
ray­films
For­3D­
«
games
For­3D­
films­from­
broadcas-
ters
Note:
Refer to the user manual of the Grundig AS-
7
3D G glasses for further information about
usage, cleaning and care of the glasses.
»HDmI4« input does not support HDMI1.4.
7
>
«.
Frame Packing 1080p @
23.98/24Hz
Frame Packing 720p @ 50 or
59.94/60Hz
Side by Side 1080i @ 50 or
Horizontal 59.94/60Hz
Top and 720p @ 50 or
Bottom 59.94/60Hz
1080p @
23.97/24Hz