ENGLISH CONTENTS - ------------------------------------------------------------------------------------------------------------------------------------ Dear Customers, This instruction manual describes the most important connections, settings, and functions for your new television. The more detailed instruction manual is available under www. grundig.com in the "Downloads" section. 3 SetupANDSAFETY Notes on still images Service information for dealers Environmental note Note for the Product Package Licence 5 CONNECTIONANDPREPARATION Connecting the antenna (sockets A) Connecting external data media (socket B) Connecting a BluRay player or a game pad (socket Inserting the CA module (slot D) Connecting the power cord Inserting batteries into the r emote control 7 OVERVIEW The remote control – Main functions Navigation in the menus 9...
SETUPANDSAFETY - ----------------------------------------------------------------------------------------------------- Please note the following instructions when Do not connect any other equipment while the device is setting up the television set: switched on. Also switch off other equipment before connect- ing it. This television is designed to receive and display video and audio signals. Do not plug in the power cord of the device until you have All other uses are expressly prohibited. connected the external equipment and the antenna. The ideal viewing distance is five times the d iagonal screen Make sure the mains plug is freely accessible. size. Keep the TV away from following devices as much as possi- Light falling on the screen impairs picture q uality. ble: cell phone, microwave and other devices that uses high To ensure the device is always adequately ventilated, make frequency radio wave. Otherwise, TV may be malfunction sure there is sufficient space between the television set and due to radio wave interference. nearby furniture. Do not expose the batteries to excessive heat such as direct The television is designed for use in dry rooms. If you do use sunlight, fire, etc.
SETUPANDSAFETY - ----------------------------------------------------------------------------------------------------- Serviceinformationfordealers NotefortheProductPackage Packaging materials of your product are recyclable. Please en- The product complies with the following sure that packaging materials of your product are disposed of EU directives and regulations: separately in accordance with the regulations set by the local 2006/95/EC: Directive on the harmonisa- authorities in order to have the packaging materials included tion of the laws of Member States relating to in the environmental friendly recycling process. designed for use within certain voltage limits. Neverplaceyourtelevisionsetinanun- 2004/108/EC: Directive relating to electromagnetic compat- stablecondition ibility. A television set may fall, causing serious personal injury or 2009/125/EC: Ecodesign requirements death. Many injuries, particularly to children, can be avoided for energy-using products; by taking simple precautions such as: Implementing Reg (EC) No 642/2009: Ecodesingn require- Use furniture that can safely support the television set. ments for Televisions; Ensure the television set is not overhanging the edge of the Implementing Reg (EC) No 278/2009: Ecodesingn require- supporting furniture. ments for no-load condition electric power consuption and av- Do not place the television set on tall furniture (for example, erage active efficiency of external power supplies. (for models...
CONNECTIONANDPREPARATION - ---------------------------------------------- Connectingtheantenna(socketA) Connectingexternaldatamedia (socketB) To receive digital satellite channels (DVB-S), connect the » « satellite antenna cable to the a ntenna socket »SATEL- Connect the socket of the t elevision and the cor- responding socket of the data medium (external hard LITE« on the television set. disk) using a USB cable; 2a To receive terrestrial digital broadcasters (DVB-T) connect Notes: the cable for the rooftop or indoor antenna (passive or Before removing the external data medium, the television active indoor antenna with its own power supply) to the must be switched to standby, so that no data loss occurs.
CONNECTIONANDPREPARATION - ---------------------------------------------- ConnectingaBluRayplayeroragame Insertingbatteriesintothe r emote pad(socketC) control Open the battery compartment by removing the lid. Connect the »HDMI1« or »HDMI2« socket on the television and the corresponding HDMI socket on the BluRay player I nsert the batteries (2 x 1.5 V micro, for example R03 or AAA). Observe the polarity marked in the bottom of the or the game pad using a standard HDMI cable. battery c ompartment. InsertingtheCAmodule(slotD) Close the battery compartment. Note: Note: If the television no longer reacts properly to remote con- Switch the device off before you insert a CA module trol commands, the batteries may be flat. Always remove into the »CI« slot. used batteries. Insert the corresponding smart card into the CI module. The manufacturer accepts no liability for damage caused Insert the CI module with the smart card into the »CI« slot by leaking batteries.
OVERVIEW ------------------------------------------------------------------------------------------------------------------------------------ Theremotecontrol–Mainfunctions Switches on and off (Standby). Switches on from standby; Selects channel – directly. S witches between S elects the channel list (»All«, teletext and TV mode. »FAV 1« to »FAV 4«). O pens the »HDMI CEC Device List«. Exit the menu. Display information. Z apping function; Opens the main menu. switches back one menu level in the menus. Opens the channel list. Opens the electronic TV guide. Opens the TOOLS menu. O pens menu for AV channels. Adjusts the volume. < > Then select using » «, » «, » « or » « and press »OK« to confirm. Λ Muting. S witches on from standby; Selects channel – in steps.
OVERVIEW ------------------------------------------------------------------------------------------------------------------------------------ Navigationinthemenus Display the required menu item with »OK«. – T he menu (e.g. »PICTURE SETTINGS«) appears. The main menu and submenus for your television enable you to select many functions and carry out all required settings. 20.09.2010 You access the main menu with »MENU« and select the 15:46 PICTURE SETTINGS submenus using » « or » «. To activate the required Λ submenu, select »OK«. < > Select the settings using » « or » «.
SETTINGS ----------------------------------------------------------------------------------------------------------------------------------------- Selectinglanguage,countryandoper- Initialset-upandtuning t elevisionchan- atingmode nels Switch on the television set from standby with » «, T he television set is equipped with automatic channel search, »1…0« or »P+« or »P-«. which searches for satellite channels (DVB-S/S2), terrestrial – During initial set-up, the »Installation Guide« will be dis- channels (DVB-T), cable channels (DVB-C) and analogue played. channels. Help: You start the search and the television channels will be stored If this menu is not displayed, restore the t elevision set into the different Program Tables. Following, you can sort the to its default settings on "Detailed Manual".
SETTINGS ----------------------------------------------------------------------------------------------------------------------------------------- Tuningterrestrialtelevisionchannels Tuningtelevisionchannelsfromthe (DVB-T) cableprovider(DVB-C) In the »Source Setup« menu, in the »Connection Type« In the »Source Setup« menu, in the »Connection Type« < > line, select the option »Air« with » « or » «. < > line, select the option »Cable« with » « or » «. Select the line »Scan Type« with » « or » «. S elect the line »Scan Type« with » « or » «.
Page 10
SETTINGS ----------------------------------------------------------------------------------------------------------------------------------------- Selectingchannellists Note: Repeat steps 2 and 3 if you would like to change other Open the menu with »MENU«. channels. Select the »SOURCE SETUP« menu with » « or » « and Λ press »OK« to confirm. Quit the program table with »EXIT«. – T he »SOURCE SETUP« menu appears. Sortingchannelsintheprogramtable S elect the line »Programe Table« with » « or » « and Λ (only satellite channels and digital television channels from the press »OK« to confirm. cable provider) – T he menu »PROGRAM TABLE« appears. You can sort the order of the channels in the program table according different criteria. INSTALLATION PROGRAM TABLE Network ALL In the »PROGRAM TABLE« menu, select the Sort mode by 1 Das Erste HD ASTRA 19.2°...
TELEVISION-OPERATION -------------------------------------------------------------------------------- Basicfunctions Freeze-frame If you wish to view a particular scene for longer, you can Switchingonandoff “freeze” the frame of the current programme. Activate the freeze-frame function with » «. Press » «, »1…0« or »P+« or »P-« to switch on the televi- sion from standby mode. End the freeze-frame function with » «. Press » « to switch the television to standby. Picturesettings Selectingchannels Various picture settings are available. Open the Tools menu with »TOOLS«. Press »1…0« to select presets directly. Select the menu item »Picture Mode« with » « or » «. Select television channels step by step with »P+« or »P-«. Λ < > 3 Select the picture setting by pressing »...
TELEVISION-OPERATION -------------------------------------------------------------------------------- ElectronicTVguide The electronic TV guide provides an overview of all pro- grammes that will be broadcast in the next week (for digital channels only). Press »GUIDE« to display channel information. Notes: Not all channels supply provide a detailed TV guide. Many broadcasters transmit the current schedule, but do not offer detailed descriptions. There are broadcasters which do not provide any infor- mation at all. Press » « or » « to select a television c hannel. Λ – T oday's programmes on the television channel selected are displayed. Switch to the information about the current programme >...
USBOPERATION --------------------------------------------------------------------------------------------------------------- Fileformats Thefilebrowser Your television can work with the following file formats using The file browser displays video, audio and p icture files stored the USB sockets: on external data media. If an external data medium contains files in d ifferent formats, Videodata you can, when necessary, filter out the formats not required. Special codecs for video compression and d ecompression provide more memory space without compromising the picture Mainmenuofthefilebrowser quality excessively. Your television plays video files in the formats XVID, H.264/ MPEG-4 AVC (L4.1, 4 reference pictures), MPEG-4, MPEG-2, MPEG-1, MJPEG and MOV. The following file name extensions are also supported: “.avi”, “mkv”, “.mp4”, “.ts”, “.mov”, “.mpg”, “.dat”, “.vob”,”.divx”. VIDEO FILES Format (codec) information is embedded within the file con- ROOT tent and may differ depending on the file extension. “.avi”, Photo “.mkv” or “.divx” files containing divx codec within are not Music playbacked.
USBOPERATION --------------------------------------------------------------------------------------------------------------- Basicplaybackfunctions Notes: Use » « to select »Up Folder«, when you would like Select the data medium by pressing » «, use » «, » «, Λ Λ to return to the last folder. Use »Root« (and then press < > » « or » « to select the option »USB« and press »OK« to »OK«) to return to the main folder. confirm. It is possible that files which are actually supported do – T he file browser appears.