Connecting External Data Media - Grundig FineArts ­55 ­FLE ­9170 ­SH User Manual

uSB­opErAtIoN
Connecting­external­­
data­media­
Before connecting the data medium, switch the
television to standby using »
d evice and then switch the television on again.
Before removing the external data medium,
the television set must be switched to standby,
so that no data loss occurs.
Notes:
The »uSB1« socket of the television set
7
s upplies a maximum power of 500 mA in
accordance with USB specifications. Exter-
nal hard disks which require more power
may therefore only be connected to the
»uSB2­(HDD)« of the television set.
If you use a network cable for external hard
7
disks which are connected to the
(HDD)« socket on the television, this net-
work cable must also be disconnected from
the power supply when the television is
switched off.
External data media may not be disconnect-
7
ed from the television set while files on the
data medium are being accessed.
A bi-directional data transfer as defined for
7
ITE (Information Technology Equipment)
d evices in EN 55022/EN 55024 is not
possible.
U SB transfer is not in itself an operating
7
mode. It is only an additional function.
­---------------------------------------------------------------------------------------------------------------
8 «. Connect the
»uSB2­
1 Connect the
»uSB2­
television and the corresponding socket on
the data device (external hard drive, digital
camera, card reader or MP3 player) using a
USB cable;
or
insert the USB plug of the USB memory stick
into the »uSB1« socket of the television set.
2 Confirm the display »
(green).
– T he file browser appears.
(HDD)« socket of the
« with » «

­ 4 7
ENGLISH