Grundig FineArts ­55 ­FLE ­9170 ­SH User Manual page 33

SmArt­INtEr@CtIvE­tv­AND­HomE­NEtworK
manual­connection
Certain networks require Static IP address. If
your network requires a Static IP address, you
must enter the »IP Address«, »Netmask«, »Gate-
way« and »DNS« values manually. You can ob-
tain your »IP Address«, »Netmask«, »Gateway«
and »DNS« values from your Internet Service
Provider (ISP).
1 Open the menu with »mENu«.
2 Select the line »INTER@CTIVE TV« with »
or » « and press »oK« to confirm.
Λ
– T he »INTER@CTIVE TV« menu appears.
3 Select »Connection Type« with »
and then select »Wireless« with »
4 Select »Select Access Point« with »
» « and confirm with »oK«.
Λ
– » Select Access Point« menu appears and
available wireless networks are scanned
and displayed in the menu
5 Select the network that you want to connect
with » «, » «, »
v Λ
»oK«.
– W ireless connection password screen is
displayed.
6 Select the required character with »
< >
» « and » « and move to the next character
with »oK«.
– S elect »ABC« for uppercase and »abc«
for lower case and confirm with »oK«.
– S elect »?@123« for numbers and symbols
and confirm with »oK«.
– E nter the password, select »Confirm« with
<
» «, » «, »
v Λ
»oK«.
Notes:
In WEP encryption system, more than one
7
network password can be assigned for the
network. Your television can only connect to
network with level 1 password.
For TV to discover the wireless modem on
7
the network, the network name should
support ASCII characters.
­ 3 4
ENGLISH
« or »
v
<
« or »
v
< >
« or » « and confirm with
«, »
v
>
« or » « and confirm with
7 Select »Network Configuration« with »
» « and then select »Manual« with »
Λ
>
» «. »IP Address«, »Netmask«, »Gateway«
and »DNS« options are active.
8 Select »IP Address« with »
Enter the IP address with »1...0« and press
» « (green) to save the value.

9 Select »DNS« with »
Enter the DNS address with »1...0« and press
» « (green) to save the value.
« 
v
10 Select »Netmask« with »
Enter the Netmask with »1...0« and press
» « (green) to save the value.
«

Λ
>
«.
11 Select »Gateway« with »
« or
Enter the Gateway with »1...0« and press
» « (green) to save the value.

12 Start the registration to the home network by
pressing »
– T he mesage »Connecting ... Please Wait«
appears.
13 Press »

network connection is established with the
current settings.
– T he messages »Testing ... Please Wait«
«,
appears, after successfull announcement
Λ
the messages »Connecting To Gateway:
Success« and »Internet Connection:
Success«.
14 Press »mENu« to end the setting.
« and press »oK«.
v
« and press »oK«.
v
« and press »oK«.
v
« and press »oK«.
v
« (red).

« (green) to make sure that the
­
« or
v
<
« or