Auto Clear Setting - Kyocera KM-1620 Operation Manual

4
Press either the Zoom (+) key or the Zoom (–) key and select
the amount of time for transition into Silent Mode.
Inch specifications
5
Press the [Enter] key.
The display will return to that of Step 2.
Inch specifications

Auto Clear Setting

Set whether or not to automatically return the copier to "ready to
copy" state when copying is finished.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
2
Press either the Zoom (+) or Zoom (–) key to display "F32".
Inch specifications
Metric specifications
Metric specifications
Metric specifications
Metric specifications
Section 6 COPIER MANAGEMENT
3
Press the [Enter] key.
Inch specifications
4
Press either the Zoom (+) or Zoom (–) key and select either
"on" in the case where the transition to Auto Clear is to be
made or "oFF" when it is not.
Inch specifications
5
Press the [Enter] key.
The display will return to that of Step 2.
Inch specifications
Auto Off Setting
Set whether or not to automatically enter Off Mode when copying is
completed or after operations have been finished.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
Metric specifications
Metric specifications
Metric specifications
Metric specifications
6-29