Copy Limit - Kyocera KM-1620 Operation Manual

Section 6 COPIER MANAGEMENT
8
Press either the Zoom (+) or Zoom (–) key and input the
Width Size (X Direction) in inch/mm units.
Inch specifications
9
Press the [Enter] key.
The display will return to that of Step 2.
Inch specifications

Copy Limit

Limits the number of copies or sets of copies that can be made at
one time.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
2
Press either the Zoom (+) or Zoom (–) key to display "F24".
Inch specifications
6-24
Metric specifications
Metric specifications
Metric specifications
Metric specifications
3
Press the [Enter] key.
Inch specifications
4
Press either the Zoom (+) key or the Zoom (–) key and set
the copy limit value (1 to 250). This can also be input using
the Keypad.
Inch specifications
5
Press the [Enter] key.
The display will return to that of Step 2.
Inch specifications
2-Sided Copy Reverse Side Rotation
Set whether or not to rotate the reverse-side for 2-Sided Copy.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
Metric specifications
Metric specifications
Metric specifications
Metric specifications