Border Width - Kyocera KM-1620 Operation Manual

Section 6 COPIER MANAGEMENT
5
Press the [Enter] key.
The display will return to that of Step 2.
Inch specifications

Border Width

Perform the following procedure to determine the default valve of
the width of the Border Erase mode.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
2
Press either the Zoom (+) or Zoom (–) key to display "F27".
Inch specifications
3
Press the [Enter] key.
Inch specifications
6-26
Metric specifications
Metric specifications
Metric specifications
Metric specifications
4
Press either the Zoom (+) key or the Zoom (–) key and select
the initial value for the Border Width from among "0.13",
"0.25", "0.38", "0.50", "0.63", "0.75"(")/1 - 18 (mm).
Inch specifications
5
Press the [Enter] key.
The display will return to that of Step 2.
Inch specifications
4 in 1 Layout Order
Set the initial value for the layout when making 4 in 1 layout mode.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
2
Press either the Zoom (+) or Zoom (–) key to display "F28".
Inch specifications
Metric specifications
Metric specifications
Metric specifications
Metric specifications