Exposure Steps; Auto Exposure Adjustment - Kyocera KM-1620 Operation Manual

Section 6 COPIER MANAGEMENT
4
When Eco-copy is to be used as the initial value press the
Zoom (–) key and select "on" (Enable).
Inch specifications
5
Press the [Enter] key.
The display will return to that of Step 2.
Inch specifications

Exposure Steps

Changes the number of steps for the copy's exposure.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
2
Press either the Zoom (+) or Zoom (–) key to display "F05".
Inch specifications
6-14
Metric specifications
Metric specifications
Metric specifications
Metric specifications
3
Press the [Enter] key.
Inch specifications
4
Press either the Zoom (+) key or the Zoom (–) key and select
either "1- (1 Step)", or "2- (0.5 Step)".
Inch specifications
5
Press the [Enter] key.
The display will return to that of Step 2.
Inch specifications

Auto Exposure Adjustment

Adjusts the overall exposure of the copy when Auto Exposure Mode
is used.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
Metric specifications
Metric specifications
Metric specifications
Metric specifications